C A N
Controller Area Network
C P U - C a r d s
General Purpose Controller; 80C552 22
MHz PHILIPS CPU; 64K EPROM; 32K SRAM Lithium battery backed;
40 TTL I/O lines; 1/2 RS 232, RS 422 or RS 485 line; CAN linee; Watch Dog; Buzzer; 8 dip
switch; 3 lines counter; 8 A/D 10 bits lines; 2 PWM; Real Time
Clock Lithium battery backed; Abaco® BUS interface
General Purpose Controller AMD 80C188ES + CAN
grifo® Analog BLOCK - CAN - C P U
GAB- Housing, 8 Alalog-In, 4 Opto-In, 4 Relay
Housing Analog BLOCK Module witch
8 Analog-In ,4 Opto-In, 4 Relay Outputs;
Serial Line RS232 or TTL, RS422/485, Current Loop;1 I2C BUS line, 1 Serial Line USB
or CAN; Power Supply.
grifo® Mini BLOCK - CAN - C P U
GMB- Housing, 8 Opto-In, 4 Relay
Housing Mini BLOCK Module witch
8 Opto-In and 4 Relay Outputs; Serial Line RS232
or TTL, RS422/485, Current Loop; 1 I2C
BUS line,
1 Serial Line USB or CAN; Power Supply.
GMB - Housing, 16 Opto-In, 8 Relay
Housing Mini BLOCK Module witch
16 Opto-In and 8 Relay Outputs; 2 Serial Line RS232
or TTL; 1 Serial Line RS422, RS485, Current Loop; 1 I2C BUS line, 1 Serial Line USB
or CAN; Power Supply.
GMB - Housing, 24 Opto-In, 16 Relay
Mini BLOCK Module witch 24
Opto-In and 16 Relay Outputs; 2 Serial Line RS232 or TTL;
1 Serial Line RS422, RS485, Current Loop; 1 I2C
BUS line,
1 Serial Line USB
or CAN; Power Supply.
QTP GPC® Type - C P U
QTP 12, 8 Opto-In, 4 Relay
Quick Terminal Panels 12 keys; 1
LED; Graphic and Alphanumeric Display
20x2; Buzzer; Serial Line RS232, RS422/485, C. Loop; CAN; 8 Opto-in, 4 Relay, Power Supply.
QTP 16 Big - 3 Relay
Quick Terminal Panels Big 16 keys; 5
LED; Alphanumeric Display 20x4; 3 Relay; Buzzer; Serial
Line RS232, RS422/485, C. Loop; CAN;
Power Supply.
CAN - grifo® Mini Modules - 8 0 5 1 Core
Controller Area Network - grifo® Mini Module Zero
This CAN Mini Module has a 28 pin
connector and it is based on Atmel T89C51CC03 CPU with
64K FLASH; 2,2K RAM; 2K FLASH for Bootloader; 2K EEPROM;
3 Timers Counters and 5 Programmable Counter Array channels (for
PWM, watch dog, compare, capture); RTC + 240 Bytes SRAM, backed
by Lithium battery; I2C BUS; 22 TTL I/O lines; 8 A/D 10 bits;
RS 232 or TTL; CAN; 2
status LEDs; configuration dip switch; etc.
Controller Area Network - grifo® Mini Module 1
This CAN Mini Module has a 28 pin
connector and it is based on Atmel T89C51CC01 CPU with
32K FLASH; 256 Byte RAM;1K ERAM; 2K FLASH for Bootloader;
2K EEPROM; 3 Timers Counters and 5 Programmable Counter Array
channels (for PWM, watch dog, compare, capture); RTC + 240 Bytes
SRAM, backed by Lithium battery; I2C BUS; 22 TTL I/O lines; 8
A/D 10 bits; RS 232 or TTL; CAN;
2 status LEDs; configuration dip switch; etc.
Controller Area Network - grifo® Mini Module 2
This CAN Mini Module has a 28 pin
connector and it is based on Atmel T89C51CC02 CPU with
16K FLASH; 256 Byte RAM; 256 Byte ERAM; 2K FLASH for Bootloader;
2K EEPROM; 3 Timer Counter and 2 Programmable Counter Array channels
(for PWM, compare, capture); RTC + 240 Bytes SRAM, backed by
Lithium battery; I2C BUS; 18 TTL I/O lines; 8 A/D 10 bit: RS
232 or TTL; CAN; 1
status LED; configuration dip switch; etc.
Controller Area Network - grifo® Mini Module Test
Low price card usefull for evaluating and test
purpose of 28 pin Mini Modules type CAN GM1,
CAN GM2, etc.. It provides: D9 connectors for a
direct connections to CAN
line and RS 232 line; power supply section with standard
connector; push buttons and LEDs for digital I/O
signals management; prototype area; etc.
grifo® Mini Module AT89C51CC03
This grifo®
Mini Module has a 40 pin connector and it is based
on Atmel AT89C51CC03 CPU with 64K FLASH;
2,2K RAM; 2K FLASH for Bootloader; 2K EEPROM; 64K RAM
External Addressing; 3 Timers Counters and 5 Programmable Counter
Array channels (for PWM, watch dog, compare, capture); 34
TTL I/O lines; 8 A/D 10 bits; RS 232 or TTL; CAN; 2 status LEDs; configuration
dip switch; etc.
FREE OF CHARGE
Theoretical/Practical Course on
BASCOM 8051
CAN - grifo® Mini Modules - A V R Core
Controller Area Network - grifo® Mini Module AVR
grifo®
Mini Module has a 28 pin connector and it is based
on Atmel AT90CAN128 CPU witch 128K FLASH; 4K SRAM;
4K EEPROM; 3 Timer Counter ; 7 PWM; 5 A/D; 24 TTL I/O
lines;1 Comparetor; RTC + 240 Bytes SRAM, backed by Lithium battery;
JTAG Interface; I2C BUS; Master/Slave SPI; RS 232 or TTL; CAN; 2 status LED;
2 configuration dip switch; etc.
Controller Area Network - grifo® Mini Module Test
Low price card usefull for evaluating and test
purpose of 28 pin Mini Modules type CAN GM1,
CAN GM2, etc.. It provides: D9 connectors for a
direct connections to CAN
line and RS 232 line; power supply section with standard
connector; push buttons and LEDs for digital I/O
signals management; prototype area; etc.
Low-Cost ATMEL ISP Programmer for Micros AVR.
USB Interface.
FREE OF CHARGE
Theoretical/Practical Course on
BASCOM AVR
CAN - grifo® Mini Modules - PICCore
Controller Area Network - grifo® Mini ModulePIC
grifo®
Mini Module has a 28 pin connector and it is based
on Microchip PIC18LF4680 CPU witch 64K FLASH; 4K
SRAM; 1K EEPROM; 3 Timer Counter ; 2 PWM; 10 A/D; 23 TTL
I/O lines;1 Comparetor; RTC + 240 Bytes SRAM, backed by Lithium
battery; I2C BUS; Master/Slave SPI; RS 232 or TTL; CAN;
2 status LED; configuration dip switch; etc.
Controller Area Network - grifo® Mini Module Test
Low price card usefull for evaluating and test
purpose of 28 pin Mini Modules type CAN GM1,
CAN GM2, etc.. It provides: D9 connectors for a
direct connections to CAN
line and RS 232 line; power supply section with standard
connector; push buttons and LEDs for digital I/O
signals management; prototype area; etc.
grifo® Mini Module Programmer
Low price card usefull for programmer 28 or
40 pin grifo®
Mini Modules type GMM 876, GMM 4620,
CANPIC, etc. It provides: ZIF 40 pin socket; D9
connectors for a direct connections to RS 232 line; Connectors
RJ12 for MPLAB®;
Connectors 10 pin for a direct connections to MP PIK+; power supply section with
standard connector; 2 LEDs; etc.
COMMUNICATION
Control Area Network
1 CAN canale.
4 Type card.
PDF Manual
Q T P - Quick Terminal Panel
Quick Terminal Panels 12 keys; 1
LED; Graphic and Alphanumeric Display
20x2; Buzzer; Serial Line RS232, RS422/485, C. Loop; CAN; Power Supply.
Without keyboard; Graphic
and Alphanumeric Display 20x2; Buzzer; Serial Line RS232,
RS422/485, C. Loop; CAN;
Power Supply.
QTP 16 Big - 3 Relay
Quick Terminal Panels Big 16 keys; 5
LED; Alphanumeric Display 20x4; 3 Relay; Buzzer; Serial
Line RS232, RS422/485, C. Loop; CAN;
Power Supply.
QTP 16 Big - 3 Relay
Without keyboard; Alphanumeric
Display 20x4; 3 Relay; Buzzer; Serial Line RS232, RS422/485,
C. Loop; CAN; Power Supply.
Graphic Quik Terminal
Panel 28 keys; 16 LEDs; Display LCD 240x128 pixels;
Buzzer; 1 Opto-Coupled Serial line RS 232. Additional Opto-Coupled
serial line RS 232, RS 422, RS 485, CAN,
Current Loop; Built-in Power Supply.
INTERFACE
CAN232 is a very small dongle that plugs into any PC COM Port, or any other RS232 port in an embedded system and gives an instant CAN connectivity. This means it can be treated by software as a standard COM Port (serial port) which eliminates the need for any extra drivers. Send and receive can be done in standard ASCII format.
CANUSB is a very small dongle that plugs into any PC COM Port, or any other RS232 port in an embedded system and gives an instant CAN connectivity. This means it can be treated by software as a standard COM Port (serial port) which eliminates the need for any extra drivers. Send and receive can be done in standard ASCII format.
