The CCR D connectors is a group of communication cables,
with 1,4 to 2 meters length, equipped on the two sides with different
combinations of D connectors; these cables are divided in some
other sub-groups as below described.
The CCR D25 is a sub-group of communication cables, with 2 meters length, equipped with a 25 pins D connector on one side anda second D connector on the other side.
This cable is realized with 25 wires, connected to a female D25 connector and a second male D25 connector in direct point to point mode, or in other words it is an extension cable for D25 connectors. It performs RS 232 link between the male D25 pins connector of one COM serial line of P.C. and the female D25 connector available on S4 programmer, or any other commercial serial device that can be directly connected to P.C. (bar code reader, terminal, scanner, badge reader, etc.).
This cable is realized with 25 wires, connected to two male D25 connectors in direct point to point mode, complete of shielding copper. It performs parallel link between the female D25 pins connector of one LPT printer line of P.C. and the female D25 connector available on PCC A26 module (CENTRONICS to ABACO(r) I/O BUS standards converter), by ensuring right functionality even in harsh environments and with high transfer rate.
This cable is realized with 5 wires, connected to a female D25 connector and a second male D25 connector. It performs RS 232 link between the male D25 pins connector of one COM serial line of P.C. and the female D25 connector available on some grifo® cards as NCS 01, GPC® 011, GPC® 11, GPC® 05, etc. together with grifo® software development tools (GDOS xxx., FGDOS xxx, FMO 52, NO ICE xx, ICC 11, etc.)
This cable is realized with 5 wires, connected to a female D25 connector and a female D9 connector. It performs RS 232 link between the male D25 pins connector of one COM serial line of P.C. and the male D9 connector available on some grifo® cards as the GPC® 15R, together with grifo® software development tools (GDOS xxx., FGDOS xxx, FMO 52, NO ICE xx, etc.)
The CCR D9 is a sub-group of communication cables, with 2 meters length, equipped with a 9 pins D connector on one side anda second D connector on the other side.
This cable is realized with 9 wires, connected to a female D9 connector and a male D25 connector. It performs RS 232 link between the male D9 pins connector of one COM serial line of P.C. and the female D25 connector available on S4 programmer, or any other commercial serial device that can be directly connected to P.C. (bar code reader, terminal, scanner, badge reader, etc.).
This cable is realized with 5 wires, connected to a female D9 connector and a male D25 connector. It performs RS 232 link between the male D9 pins connector of one COM serial line of P.C. and the female D25 connector available on some grifo® cards as NCS 01, GPC® 011, GPC® 11, GPC® 05, etc. together with grifo® software development tools (GDOS xxx., FGDOS xxx, FMO 52, NO ICE xx, ICC 11, etc.)
This cable is realized with 5 wires, connected to a female D9 connector and a second female D9 connector. It performs RS 232 link between the male D9 pins connector of one COM serial line of P.C. and the male D9 connector available on some grifo® cards as the GPC® 15R, together with grifo® software development tools (GDOS xxx., FGDOS xxx, FMO 52, NO ICE xx, etc.)
This cable is realized with 5 wires, connected to a female D9 connector and a male D9 connector. It performs RS 232 link between the male D9 pins connector of one COM serial line of P.C. and the female D9 connector available on some grifo® cards as the GPC® 552, GMB HR84, QTP 12, QTP 12/R84, QTP 16, etc., together with grifo® software development tools (FMO 52, FLIP, FLASH MAGIC, etc.).
This cable is realized with 9 wires, connected to a female D9 connector and a second male D9 connector in direct point to point mode, or in other words it is an extension cable for D9 connectors. It performs RS 232 link between the male D9 pins connector of one COM serial line of P.C. and the female D9 connector available on some grifo® cards as GMM TST 2, CAN GMT, K51-AVR, etc., together with grifo® software development tools (FLIP, FLASH MAGIC, etc.), or any other commercial serial device that can be directly connected to P.C. (bar code reader, terminal, scanner, badge reader, etc.).
The CCR Dxx is a sub-group of communication cables, with 1,4 meters length, equipped with two D connectors, suitable for analog signals connection of temperature probes.
This cable is realized with 24 wires, connected to a male high
density D26 connector and one male D25 connector, complete of
shielding copper. It performs link between the first group of
analog signals (from 0 to 7) of IPC 52 card, placed on
a female high density D26 connector, and 8 temperature probes
PT100 or PT 1000 type, by ensuring right signals transport even
in harsh environments.
Pin out on male D25 connector has been selected to allow a comfortable
connection of the probes, through the cabling module FBC 125F.
This cable is realized with 16 wires, connected to a female D15 connector and one male D25 connector, complete of shielding copper. It performs link between the second group of analog signals (from 8 to 15) of IPC 52 card, placed on a male D15 connector, and 8 temperature probes Termocouple type, by ensuring right signals transport even in harsh environments. Pin out on male D25 connector has been selected to allow a comfortable connection of the probes, through the cabling module FBC 125F.
Page up-dated at January 07, 2004
